History from version v.76 to current

29.03.2016 (version 2.4.3.76)

Hi

I found a few mistakes and errors in Your program RX (version 2.4.3.76) :

1. In option Help > Identifier index > Count =< in Example 2 is: >=3    should be: <=3

2. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button "Help" doesn't work.

3. In option Options > Betting Options > General:

The option " Warn when Bets Exceed Min/Maximums"
Regardless of whether you tick this option or not, a warning appears always.

4. In option Options > Betting Options > General:

   Let's assume that I have set Starting bankroll to 1000 as default.
   While a new session, while load my own system and enter my bankroll (for example 2000) displayed on the left side in bottom. And then I go to Options > Betting Options > General and close this window by "X" or button "Close", my bankroll in main window is changing from 2000 to 1000. This action should be performed after press button "OK", but not after "X" or "Cancel".
Similar actions are in Auto Spin > Options, but here works correctly, for example:
If I have set 1000 Auto Spins as default and 750 spins remained to the end, after press "OK" the spins changing from 750 to 1000, but after press "Cancel" the spins stay on 750.

More importantly bugs:

5. In option Reports > Betting History: Bigger bug, thus I explained it in document pdf here:

6. In option Options > Betting Options > Chip Currency: Bigger bug, thus I explained in document pdf here:

I hope You will fix these errors for improve Your program and to avoid criticism of the program (such as video on YouTube above). Overall this program is powerful and very useful for me. If I will find other errors, I'll let You know. I tested the program and errors in two systems: Windows XP x32 and Windows 7 x64 at resolution of the screen 1680 x 1050.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

31.03.2016 (version 2.4.3.76)

Hi

I found one more error:

1. In option Action:

If I click on "Replay Session" and then I put any chip anywhere on the table, then appears the window "An error occurred in the application." Even if I choose option "continue application", at next put or remove of the chip the window appears again. Only choose New Session closes this window. It's troublesome, if after of each performed session I clicking on Replay Session and I want put different layout of chips. Even if You just open the program and click on the Replay Session then You cannot put anything on the table.

2. Also this window "An error occurred in the application." appears while saving the name of designed system with using symbols / \

                                    for example name:   ( Martingale / sys.1 )

it could be window with:    " You can not use this symbols as name: / \ "

The first time the window confused me, I thought that the program is broke down.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

06.04.2016 (version 2.4.3.78)

Hi

1. In option Help > Identifier index > Count =< in Example 2 is: >=3 should be: <=3

Fixed

2. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button "Help" doesn't work.

Fixed

3. In option Options > Betting Options > General:

The option " Warn when Bets Exceed Min/Maximums"
Regardless of whether you tick this option or not, a warning appears always.

Fixed

4. In option Options > Betting Options > General:

Let's assume that I have set Starting bankroll to 1000 as default.
While a new session, while load my own system and enter my bankroll (for example 2000) displayed on the left side in bottom. And then I go to Options > Betting Options > General and close this window by "X" or button "Close", my bankroll in main window is changing from 2000 to 1000. This action should be performed after press button "OK", but not after "X" or "Cancel".
Similar actions are in Auto Spin > Options, but here works correctly, for example:
If I have set 1000 Auto Spins as default and 750 spins remained to the end, after press "OK" the spins changing from 750 to 1000, but after press "Cancel" the spins stay on 750.

Fixed

5. In option Reports > Betting History: Bigger bug, thus I explained it in document pdf here:

Still Not Fixed but You informed about that: "I have to write to the component developer as it seems to be an issue with the component using a Data source connection".

6. In option Options > Betting Options > Chip Currency: Bigger bug, thus I explained in document pdf here:

Not All Fixed

Still problem with empty chips at new version 2.4.3.78.
Only Fixed error which changing color of chip from blue to yellow although value represent chip of color blue, look in pdf here:

7. In option Action:

If I click on "Replay Session" and then I put any chip anywhere on the table, then appears the window "An error occurred in the application." Even if I choose option "continue application", at next put or remove of the chip the window appears again. Only choose New Session closes this window. It's troublesome, if after of each performed session I clicking on Replay Session and I want put new, different layout of chips. Even if You just open the program and click on the Replay Session then You can not put anything on the table.

Fixed   but You didn't inform me about this fix. In future please inform me about all any changes which I reported if we have to cooperate.

8. Also this window "An error occurred in the application." appears while saving the name of designed system with using the symbol: /

                                    for example name:   ( Martingale / sys.1 )

it could be window with:    " You can not use this symbol as name: / "

The first time the window confused me, I thought that the program is broke down.
If we use this symbol \ as name, for example: ( Martingale \ sys.1 ) then after save we get the name: sys.1 .   All before the symbol \ is not saving.

  Not Fixed

9. In option Statistics > Summary: This bug I explained in document pdf here:

Not Fixed

It's all the bugs which I detected for now. Like before, I tested the program and errors in two systems: Windows XP x32 and Windows 7 x64 at resolution of the screen 1680 x 1050 and another computer in this version.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

07.04.2016 (version 2.4.3.78)

Hello

9. Also this window "An error occurred in the application." appears while saving the name of designed system with using the symbol: /

                                    for example name:   ( Martingale / sys.1 )

it could be window with:    " You can not use this symbol as name: / "

The first time the window confused me, I thought that the program is broke down.
If we use this symbol \ as name, for example: ( Martingale \ sys.1 ) then after save we get the name: sys.1 .   All before the symbol \ is not saving.

  Not Fixed

The \ is not allowed for windows. It refers to use trying to save a file like “Martingale\sys 1”.

Don’t use \ or / when saving files.

I will check for those and let the user know.

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

08.04.2016 (version 2.4.3.78)

Hi

About symbols \ / while saving, I know that, but may You should put some information about that in index for other users.

Complete anyway

So what left yet, Let's refresh and summary:

1. In option Reports > Betting History: Bigger bug, thus I explained it in document pdf here:

Still Not Fixed but You informed about that: "I have to write to the component developer as it seems to be an issue with the component using a Data source connection".

2. Still problem with empty chips at new version 2.4.3.78.

Not Fixed

Really I have no idea how I can help You with empty chips. I living in England and in casinos ground You can put bets from 0,05 cents in machines. I noticed that Your program working incorrectly only with the chips with a value of:

0,1 0,2 0,3 0,4 0,8 0,9

but works correctly with the chips with a value of:

0,5 0,6 0,7

and incorrectly in hundredth:

0,05 0,09

and correctly in hundredth:

0,01 0,02 0,03 0,04 0,06 0,07 0,08

If You will check each one values from 0,01 to 0,9 maybe You will find the error responsibility for empty chips. I think this is fastest a way to find the bug.

Another way is: Check why working correctly chips, and how working correctly chips. Find the difference between them and change them or overwrite incorrectly chips structure on structure of correctly chips at keep own values and then check.

3. In option Statistics > Summary: This bug I explained in document pdf here:

Not Fixed

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

21.04.2016 (version 2.4.3.78)

I found another bug:

1. In option Reports > Bankroll Balance Trend. I explained this in document pdf here:

Like before I tested this bug on both my systems Windows XP x32 and Windows 7 x64 at resolution 1680 x 1050.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

22.04.2016 (version 2.4.3.78)

Hello

I have a suggestion about graph. Could You add a line representing Starting Bankroll on the graph? The graph would be more useful. Would show the current status of the win / loss to Starting Bankroll. It would be very useful for me and other users. I put document pdf here as example:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

05.05.2016 (version 2.4.3.78)

Hello

I found another bugs. These errors are in both versions .76 and newer .78 which You gave me to testing.

1. 0 is not displayed
2. When Perform UNDO/REDO is set on (-) then error
3. After a few press on Spin and then Undo Redo displays wrong number

I explained it here in document PDF:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

20.06.2016 (version 2.4.3.78)

Hi

In Your program is another error with counting. I explained that in document pdf here:

My question is:

When You expect release newer version of program without bugs which I presented to You before (from March to May)?.

From 20 of March you didn't fix nothing.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

27.06.2016 (version 2.4.3.78)

I explained better this errors here in format pdf:

Also I put another document pdf concerning the same issue, which I sent you earlier in March or April. Look this also:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

03.07.2016 (version 2.4.3.80)

Hello Tomasz

I have completed MOST of the reported bug issues. The Drawdown is still not fixed.

The Max Risk and Current balance should match with all three windows. Summary, Bankroll Balance and Betting History.

Please download here: http://www.uxsoftware.com/download/RouletteXtreme20_24380.exe

If you find not correct or more, please email them to me.

Please note, that I will release this version tomorrow as there are several RX Bot casino table modifications that must go out.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

05.07.2016 (version 2.4.3.81)

Hello

Please download new release from our website: http://www.uxsoftware.com/pages/download.html

This contains some more bug fixes. I have not fix the drawdown but the Max Risk should be working.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

07.07.2016 (version 2.4.3.81)

Hello

I tested Your latest version v.81 from Your website: http://www.uxsoftware.com/pages/download.html

Good work but still many issues to fix. You said: "I have completed MOST of the reported bug issues." You mean issues from last attachment, because OVERALL most is NOT COMPLETED. Many issues is from 1-2 months ago still not fixed. OK let's summary:

1. In option Reports > Betting History: Bigger bug, thus I explained it in document pdf here and also I put video here: in which I presented what's happening after use moving scroll. The values the change after press on them.

Not Fixed but You informed about that: "I have to write to the component developer as it seems to be an issue with the component using a Data source connection".
(but this takes too long now 2 months)

2. In option Options > Betting Options > Chip Currency: Bigger bug, thus I explained in document pdf here:

Not All Fixed Still problem with empty chips at new version 2.4.3.81. Only Fixed error which changing color of chip from blue to yellow although value represent chip of color blue.

3. In option Statistics > Summary: This bug (additionally actual version) I explained in document pdf here:

Not All Fixed

4. In option Reports > Bankroll Balance Trend. I explained this in document pdf here:

Not Fixed

5.   1. 0 is not displayed

      2. When Perform UNDO/REDO is set on (-) then error

      3. After a few press on Spin and then Undo Redo displays wrong number

I explained it here in document PDF:

Not Fixed

6. In Your program is another error with counting. I explained that in document pdf here:

Fixed

7. I explained this errors about UNDO/REDO in format pdf here:

Not All Fixed    In window "Summary Statistics” Unit Drawdown left to fix.

New two issues:

8. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window should be caption "Scrolling Adjustment" but is empty, look here:

Not Fixed

9. In option Options > Betting Options > General: If I set any other value of chips than 1, then after choose Options > Betting Options > General and press OK, value always come back to 1, why? I'm not choose the value in this window.

Not Fixed

Suggestions ( optional ) :

I have a suggestion about graph. Could You add a line representing Starting Bankroll on the graph? The graph would be more useful. Would show the current status of the win / loss to Starting Bankroll. It would be very useful for me and other users. I put document pdf here as example:

Not Added

Regards

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

09.07.2016 (version 2.4.3.81)

I found one more error. I explained it in document pdf here:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

15.07.2016 (version 2.4.3.82)

Hello

This is more bug fixes you reported EXCEPT for the History grid. I already downloaded a new version of the Grid components and will be in the process of converting to RX and try to get the issue fix.

Please download here: http://www.uxsoftware.com/download/RouletteXtreme20_24382.exe

Let me know your thoughts before I publish to the market.

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

16.07.2016 (version 2.4.3.83)

I was able to install and correct the Betting History GRID component. It does not repeat same numbers as I tested very much.

The little indicator (Black arrow) is gone. It was causing some issues. You can still see what record you are on by clicking on the row and it will be slightly highlighted.

Please download here: http://www.uxsoftware.com/pages/download.html

Thanks for bringing these to my attention. I know you may find more so just let me know.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

18.07.2016 (version 2.4.3.83)

I tested Your latest version v.83:

EXCELLENT WORK !!!

Now I can say: This program works correctly. Many Thanks!!!

Let's summary:

1. In option Reports > Betting History: Bigger bug, thus I explained it in document pdf here and also I put video here: in which I presented what's happening after use moving scroll. The values the change after press on them.

Fixed

2. In option Options > Betting Options > Chip Currency: Bigger bug, thus I explained it in document pdf here:

Fixed

3. In option Statistics > Summary: This bug I explained in document pdf here:

Fixed

4. In option Reports > Bankroll Balance Trend. I explained this in document pdf here:

Not Fixed

5.   1. 0 is not displayed

      2. When Perform UNDO/REDO is set on (-) then error

      3. After a few press on Spin and then Undo Redo displays wrong number

I explained it in document pdf here:

Fixed

6. This error about Summary Statistics "Unit Drawdown" I explained it in document pdf here:

Not Fixed

7. Wrong colors in window Summary Statistics I explained it in document pdf here:

Not Fixed

8. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window should be caption "Scrolling Adjustment" but is empty, look here:

Not Fixed

9. In option Options > Betting Options > General: If I set any other value of chips than 1, then after choose Options > Betting Options > General and press OK, value always come back to 1, why? I'm not choose the value in this window.

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

18.07.2016 (version 2.4.3.83)

Hello

For this one below:

7. Wrong colors in window Summary Statistics (look pdf. "Wrong color").

Not Fixed

I was able to determine it is your Countries region currency format. In the USA, it is -1,899.00 (notice the comma â˜,’ and decimal place â˜.’)

It is the Space between the -1 799,00 in your region

I changed mine to yours and tested. But I may not have all of your region format. Please email me screen shot of your Region format.

Go to Control Panel, find Region, and click on advance settings. Now I have Windows 10 and you have XP. So the location may be different from yours.

The other items below I will look at later.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

19.07.2016 (version 2.4.3.83)

About Your question, look two documents in pdf here:

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

20.07.2016 (version 2.4.3.83)

I have a suggestion about new option. I explained it in document pdf here:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

20.07.2016 (version 2.4.3.83)

I will add it to my suggestion list.

Thanks

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

23.07.2016 (version 2.4.3.83)

I found another errors:

1. As You see on this video: after save new session and open saved session when we perform UNDO/REDO still problems with duplicate numbers, no first number after perform UNDO until first spin and also window appears "An error occurred in the application."
Note that all problems appears after perform all spins ( in this example on video - 10 spins ). If You not reached yet 10 spins (end), you can perform UNDO until first spin and after REDO first number will appear, also numbers no duplicate and no error window. The same problem appears after save new spins and then import them. This problem not appears now at pressing numbers on keyboard or button Spin like before because you fixed that already in last time. I presented these problems before:

2. In second video I presented how double 0 disappear after save and import of spins. I showed also how can fix that, but only MANUALLY. This is not correct way, only emergency.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

24.07.2016 (version 2.4.3.85)

This has the following:

1. Region fix for Polish and other countries

2. Double 00 missing

3. Redo/Undo working on Import spins

At least I did not have any issues but you can validate for me. J

Other request are in the queue as I will be out of town this week.

Please download here: http://www.uxsoftware.com/download/RouletteXtreme20_24385.exe

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

25.07.2016 (version 2.4.3.85)

I tested Your latest version v.85 at ALL issues from March to now for be sure that everything still works correctly.

Good work!

Let's summary:

1. Region fix for Polish and other countries

Fixed

2. Double 00 missing

Fixed

3. Redo/Undo working on Import spins and saved sessions.

Fixed

4. In option Reports > Bankroll Balance Trend. I explained this in document pdf here:
Not Fixed

5. In option Statistics > Summary Statistics” Unit Drawdown. I explained this in document pdf here:
Not Fixed

6. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window should be caption "Scrolling Adjustment" but is empty, look here:

Not Fixed

7. In option Options > Betting Options > General: If I set any other value of chips than 1, then after choose Options > Betting Options > General and press OK, value always come back to 1, why? I'm not choose the value in this window.

Not Fixed

Suggestions ( optional ) :

8. I have a new suggestion about new important option. I explained it in document pdf here:

It was a error but Fixed

9. I have a suggestion about graph. Could You add a line representing Starting Bankroll on the graph? The graph would be more useful. Would show the current status of the win / loss to Starting Bankroll. It would be very useful for me and other users. I put document pdf here as example:

Not Added

Regards

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

28.07.2016 (version 2.4.3.85)

I noticed that Unit Drawdown works correctly on both systems XP and 7 from first spin only when Bankroll is 0. Over 0 the program calculating from second spin (incorrect):

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

02.08.2016 (version 2.4.3.85)

I found a new bug. I explained it in document pdf here:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

06.08.2016 (version 2.4.3.85)

I have a question about the order lost won in the designed system. I explained it in document pdf here:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

06.08.2016 (version 2.4.3.85)

I will check the condition results before an actual won or lost.

On the error, it is True that Won identifier is not allowed after a Layout List. It was not programmed that way.

A solution would be to check each Layout dozen and use the OR

Example:

If Record “1st Dozen” layout has won each time

If record “2nd Dozen” layout has won each time

Begin

End

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

09.08.2016 (version 2.4.3.85)

I know that is another solution:

I will check the condition results before an actual won or lost.

On the error, it is True that Won identifier is not allowed after a Layout List. It was not programmed that way.

A solution would be to check each Layout dozen and use the OR

Example:

If Record "1st Dozen” layout has won each time

If record "2nd Dozen” layout has won each time

Begin

but it would be easier if both (lost and won) would be allowed. When designing the systems for a long time I thought that I was doing something wrong but it was just not programmed. This confused me a long time displaying error. Somewhere in Your program may option "Help" (am not remember) I read that only the imagination limits us in writing systems. As you can see in this issue not always only imagination limits us but also the program itself.

My question is: Could You put (won) as allowed in the script? Writing scripts will be improved and easier for users.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

11.08.2016 (version 2.4.3.85)

I am sorry, but I have major IT issues at work that consume all my time.

I will not be able to address RX for a week or so.

I do not think it is possible, but I will research and let you know.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

12.08.2016 (version 2.4.3.85)

Hello

Could You tell me how many people working at this program RX because the team should fix the errors from day to day and I'm waiting for weeks to fix bugs. Usually You do others major issues or You out of town. If I find the issue then immediately I inform You in hope to quick fix. If at this program RX really works team (I highly doubt it) whether you could convey my issues other person responsible for the errors to fix them faster because I'm not going to wait another three months for fix several errors. I'm losing a lot of my time to present in detail and as best as possible the issues not for to leave it unfinished. At the moment really I need to have fixed point 6 "Incorrect display numbers". The rest can wait a little longer.

Updated summary after test version v.85:

1. In option Reports > Bankroll Balance Trend. I explained it in document pdf here:

Not Fixed

2. In option Statistics > Summary Statistics” Unit Drawdown. I explained it in document pdf here:

Not Fixed

3. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window schould be caption "Scrolling Adjustment" but is empty, look here:

Not Fixed

4. In option Options > Betting Options > General: If I set any other value of chips than 1, then after choose Options > Betting Options > General and press OK, value always come back to 1, why? I'm not choose the value in this window.

Not Fixed

5. The numbers displaying wrong. I explained it in document pdf here:

Not Fixed

Suggestions ( optional ) :

6. I have a suggestion about graph. Could You add a line representing Starting Bankroll on the graph? The graph would be more useful. Would show the current status of the win / loss to Starting Bankroll. It would be very useful for me and other users. I put document pdf here as example:

Not Added

7. Could you put (won) as allowed in the script? Writing scripts will be improved and easier for users (if it possible). I explained it in document pdf here:

Not Added

Regards

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

13.08.2016 (version 2.4.3.85)

Hello

We have sold over (X.X) programs sold and you are the only one that has detected issues. Thank you for that.

However, our releases are every 6 months not weekends. We must test .

We have release to you sooner for you to test and then to the public.

We cannot work that fast. We are sorry for any inconvenience, but the bugs will be fix soon.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

14.08.2016 (version 2.4.3.86)

Please download this version:

http://www.uxsoftware.com/pages/download.html

It has the following fix:

3. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window schould be caption "Scrolling Adjustment" but is empty (look attachment "empty top").

6. The numbers displaying wrong. I explained it in attachment below "Incorrect display numbers"

Max Risk: This was developed by a User with his calculations. Your calculations do not match his. So, for me to change this I need to know exactly what you think this should be and I need to make sure the other User is Ok with it.

Please provide good Betting History example and formula for Max. Risk

The suggestions are on the list.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

15.08.2016 (version 2.4.3.86)

Hello

Thank You for trying fix point 6 but this point is still not fixed. I explained it in detail at point 6.

Two others bugs are fixed.

Summary after test version v.86:

1. In option Reports > Bankroll Balance Trend. I explained it in document pdf here:

Not Fixed

2. In option Statistics > Summary Statistics” Unit Drawdown. I explained it in document pdf here:

Not Fixed

3. In option Reports > Bankroll balance trend > Options > Scrolling Adjustment button - on the top of the window schould be caption "Scrolling Adjustment" but is empty, look here:

Fixed

5. The numbers displaying wrong. I explained it in document pdf here:

The numbers works correctly ONLY after choose numbers from the keyboard. After press Spin or save the session or save the spins is still problem with displays the numbers. Also the older bugs come back during perform UNDO/REDO:

after press Spin:

after save the session or save the spins:

Not Fixed and old bugs Come Back

Suggestions ( optional ) :

Not Added

7. Could you put (won) as allowed in the script? Writing scripts will be improved and easier for users (if it possible). I explained it in document pdf here:

Not Added

Regards

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

15.08.2016 (version 2.4.3.86)

Let me go back to the drawing board.

FYI: You are the only one reporting these issues. This is good but I cannot fix problems if Users do not report them.

Thank you for reporting them.

Regards

Les

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

28.09.2016 (version 2.4.3.87)

Hello

Summary after test version v.87:

1. In option Reports > Bankroll Balance Trend. I explained it in document pdf here:

Not Fixed

I found solution for this bug but support don't want to fix it:

2. In option Statistics > Summary Statistics” Unit Drawdown. I explained it in document pdf here:

Not Fixed

3. The numbers still displaying wrong:

version v.85:

press on keyboard: wrong displaying

the button "Spin": wrong displaying

after save spins: wrong displaying

after save session: wrong displaying

version v.86:

press on keyboard: Fixed

the button "Spin": wrong displaying + different numbers

after save spins: wrong displaying + different numbers

after save session: wrong displaying + different numbers

version v.87:

press on keyboard: Fixed

the button "Spin": Fixed

after save spins: wrong displaying + subtract of spins

after save session: wrong displaying + subtract of spins

For better present, I put video here:

As a whole Not Fixed

4. Wrong colors in window Summary Statistics.

This error was reported: 09.07.2016 (version 2.4.3.81)

Description of the error: 18.07.2016 and 19.07.2016 (version 2.4.3.83)

This error was fixed: 24.07.2016 (version 2.4.3.85) "Region fix for Polish and other countries"

This error came back: 28.09.2016 (version 2.4.3.87)

Not Fixed again

NEW BUGS:

5. Turbo mode not working properly:

6. Max Risk not working when is switched on option: "Deduct table bets from Bankroll Balance":

[ THIS BUG IS NOT PRESENTED IN MAIN VIDEO: "RX BUGS YOUTUBE" ]

Not Fixed

7. UNDO/REDO not working properly when returned to first spin with bet:

[ THIS BUG IS NOT PRESENTED IN MAIN VIDEO: "RX BUGS YOUTUBE" ]

Not Fixed

8. Error during initial of the systems with option "input checkbox". I explained it in document pdf here:

[ THIS BUG IS NOT PRESENTED IN MAIN VIDEO: "RX BUGS YOUTUBE" ]

Not Fixed

I found solution for this bug:

9. Wrong sequence of signs in: Help > Identifier Index. I explained it in document pdf here:

[ THIS BUG IS NOT PRESENTED IN MAIN VIDEO: "RX BUGS YOUTUBE" ]

Not Fixed

Suggestions ( optional ) :

10. I have a suggestion about graph. Could You add a line representing Starting Bankroll on the grafh? The graph would be more useful. Would show the current status of the win / loss to Starting Bankroll. It would be very useful for me and other users. I put document pdf here as example:

Not Added

11. Could you put (won) as allowed in the script? Writing scripts will beimproved and easier for users (if it possible). I explained it in document pdf here:

Not Added

Regards

Tomasz

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

07.05.2017 (version 2.4.3.89)

03.06.2017 (version 2.4.3.90)

11.06.2017 (version 2.4.3.91)

02.07.2017 (version 2.4.3.92)

13.08.2017 (version 2.4.3.93)

07.10.2017 (version 2.4.3.94)

In this version 2.4.3.94:

I found solution for errors No. 1 and 8 ( look description above in version 2.4.3.87)

I found also a new bug No. 9. (description above in version 2.4.3.87)